The JBL Bar 2.0 All-in-One MK2 is a compact, single-piece soundbar for TVs whose built-in speakers sound thin. JBL rates it at 80W total (2 x 40W, maximum at 1% THD) from two racetrack drivers, with Dolby Digital decoding built in and a surround effect created without extra speakers or wires. One HDMI ARC cable links it to the TV, and it also takes optical and Bluetooth sources. It measures 614 x 56 x 90 mm, weighs 1.6 kg, and comes with a remote, an HDMI cable and a wall-mount kit.

Table of Contents
Two racetrack drivers, 80W maximum
Inside the 614 mm cabinet of the JBL Bar 2.0 All-in-One MK2 are two racetrack drivers, each rated at up to 40W. JBL quotes these figures as maximum output at 1% THD rather than a continuous RMS figure, so read 80W as the ceiling. The published frequency response is 70 Hz to 20 kHz. That lower limit means it adds real body to voices, music and film scores compared with the speakers built into a slim TV, and JBL tunes it for deep bass from its size, but it does not reach the very low rumble a separate subwoofer delivers.

Dolby Digital and surround effect
The JBL Bar 2.0 All-in-One MK2 has Dolby Digital built in, so a Dolby Digital soundtrack from the TV, a streaming app or a receiver box is decoded by the bar itself. JBL describes a surround sound effect for TV without extra speakers or wires; it comes from processing across the two front drivers, so there are no side, rear or height speakers, and JBL does not list Dolby Atmos or DTS. For news, series and football commentary the main gain is clearer speech, which lets you keep the volume lower at night.

HDMI ARC, optical and Bluetooth
The main connection on the JBL Bar 2.0 All-in-One MK2 is one HDMI port with Audio Return Channel; plug the included HDMI cable into the ARC socket on your TV. If your TV supports HDMI-CEC, the TV remote can usually control the bar, depending on the TV settings. If the TV has no ARC port, use the optical input. Bluetooth 4.2 (A2DP 1.3, AVRCP 1.5) handles music from phones and tablets. JBL notes that USB playback works only on the US version; on other versions the USB-A port is for service. There is no Wi-Fi, AirPlay or Chromecast.

Compact size and wall mounting
At 614 x 56 x 90 mm and 1.6 kg, the JBL Bar 2.0 All-in-One MK2 sits on most TV stands without blocking the bottom of the screen, and its width suits small and medium TVs in bedrooms, guest rooms or a small majlis. A wall-mount bracket kit with screws is included, so it can sit on the wall under a mounted TV. JBL gives an operating temperature of 0 to 45 °C, so keep it out of direct sun on a balcony or near a window.
Power and what is in the box
The JBL Bar 2.0 All-in-One MK2 runs on 100 to 240 V AC at 50/60 Hz, which suits UAE mains, and standby consumption is under 0.5W. In the box you get the soundbar, a remote control with batteries, power cables (the number varies by regional version), an HDMI cable, the wall-mount bracket kit with screws, a quick start guide, a warranty card and a safety sheet. Setup takes a few minutes: connect HDMI ARC or optical, plug in power and select the input.
Who This Is Not For
The JBL Bar 2.0 All-in-One MK2 is not for anyone who wants deep cinema bass, Dolby Atmos or real surround speakers: it is a 2-driver bar with a 70 Hz lower limit and no subwoofer. It has no Wi-Fi, AirPlay, Chromecast or voice assistant, Bluetooth is the older 4.2 version, and USB music playback is not available outside the US version. Large living rooms are better served by a bigger bar with a subwoofer.
Ordering from Totot
Totot sells the JBL Bar 2.0 All-in-One MK2 brand-new and genuine in its sealed box, backed by a 1-year warranty from Totot. It reaches any emirate within 3 business days at most, with free delivery on orders from AED 300, with cash on delivery or instalments via Tabby and Tamara. Items that arrive defective or not as ordered can be returned within 14 days, and any shipping damage should be reported within 48 hours of delivery. Browse more in our Speaker range, or see the official JBL Bar 2.0 All-in-One MK2 product page.
JBL Bar 2.0 All-in-One MK2 Specifications
- Model: JBL Bar 2.0 All-in-One MK2, Black
- Output power: 80W total (2 x 40W) max at 1% THD
- Drivers: 2 racetrack drivers
- Frequency response: 70 Hz – 20 kHz
- Audio format: Dolby Digital
- HDMI: 1 x HDMI with ARC
- Other inputs: Optical, Bluetooth, USB-A (playback on US version only; service elsewhere)
- Bluetooth: 4.2; A2DP 1.3, AVRCP 1.5
- Wi-Fi: Not listed by JBL
- Power supply: 100–240 V AC, 50/60 Hz; standby under 0.5W
- Dimensions: 614 x 56 x 90 mm (W x H x D)
- Weight: 1.6 kg
- Operating temperature: 0 – 45 °C
- In the box: Soundbar, remote with batteries, power cables, HDMI cable, wall-mount bracket kit with screws, quick start guide, warranty card, safety sheet
- Warranty: 1-year warranty from Totot
JBL Bar 2.0 All-in-One MK2 FAQ
Does the JBL Bar 2.0 All-in-One MK2 need a subwoofer?
No. It is a single-piece bar with no subwoofer, and none is included or required.
Can I connect it with HDMI?
Yes. It has 1 HDMI ARC port, and an HDMI cable is in the box.
Does it support Dolby Atmos?
No. JBL lists Dolby Digital only.
Is a wall bracket included?
Yes. A wall-mount bracket kit with screws comes in the box.
Can I play music from a USB drive?
No, not outside the US version; JBL says the USB port is for service on other versions.
What is the output power?
80W total, 2 x 40W maximum at 1% THD, according to JBL.
Is it genuine?
Yes. We sell the genuine JBL Bar 2.0 All-in-One MK2, brand-new in its sealed box.
How long does delivery take?
3 business days at most across the UAE. Orders from AED 300 ship free, and the checkout page shows any current fee for your order.














Reviews
There are no reviews yet