The Lexar THOR DDR5 32GB 6000 kit is Lexar’s non-RGB THOR memory in black: two 16GB DDR5 sticks rated at 6,000MT/s, CL38-48-48-96 and 1.35V, sold under part number LD5U16G60C38LG-RGD. Lexar lists this part on its THOR OC DDR5 page, and it is the plain, no-lighting choice for builders who want reliable DDR5-6000 with Intel XMP 3.0 and AMD EXPO support and a heatsink that stays out of the way. It is available from UAE stock at Totot.
Table of Contents
Why Choose the Lexar THOR DDR5 32GB 6000 Kit
Not every build needs RGB. Many office workstations, small-form-factor PCs and closed cases gain nothing from a light bar, and an RGB kit adds software, cables in the lighting chain and often a taller module. The Lexar THOR DDR5 32GB 6000 kit drops all of that. What you get is a 1.6mm-thick solid aluminium heatsink, which Lexar says is there for heat dissipation, with a gold outline and the Lexar logo on a black face.
Lexar describes the form factor as low-profile, at about 40mm high, and lists the module dimensions as 138.3 x 40.8 x 7.6mm with the heat spreader. That makes it a sensible match for compact cases and for tower air coolers whose fans hang over the memory slots.
Profiles, Speed and Timings
The Lexar THOR DDR5 32GB 6000 kit supports both Intel XMP 3.0 and AMD EXPO. Enable the profile in the BIOS and the pair runs at 6,000MT/s with CL38-48-48-96 timings at 1.35V, the figures Lexar publishes for this 32GB kit. Until you enable a profile, the modules start at the motherboard’s default DDR5 speed.
Lexar adds a few cautions in its fine print: speeds come from internal testing, timing and voltage may vary from batch to batch, and the rated specification is not guaranteed if you mix these sticks with modules from other kits or other brands. For the best result, install the pair on its own in the two slots your motherboard manual recommends for dual-channel mode.
Stability Features
Each module carries on-die Error Correction Code (ECC) and an on-board Power Management Integrated Circuit (PMIC). Lexar says the first improves stability and reliability and the second improves power efficiency. On-die ECC works inside the DRAM chips; it is not the same as the system-level ECC used by servers.
Lexar also notes that its products are tested in Lexar Quality Labs, and it rates the memory for an operating surface temperature of 0°C to 85°C and storage from -55°C to 100°C.
Lexar THOR DDR5 32GB 6000 or THOR Z RGB?
Both are 32GB DDR5-6000 kits at CL38 and 1.35V, so performance on paper is the same. The difference is looks and size: the Lexar THOR DDR5 32GB 6000 kit has no lighting and a heatsink about 40mm tall, while the THOR Z RGB adds an RGB light bar on a 39mm module. If you want your memory to light up with the rest of the case, pick the RGB model. If you want a quiet, plain look with nothing to configure, this one is the simpler buy.
Who This Is Not For
This kit does not fit DDR4 motherboards or laptops (they use SODIMM). It is not the right pick if you want RGB lighting, since it has none. Users chasing the lowest latency should look at Lexar’s CL32 THOR OC part, which is a different product. And workloads that already need more than 32GB, such as heavy video editing or many virtual machines, call for a 64GB kit.
Ordering in the UAE
Order the Lexar THOR DDR5 32GB 6000 kit from Totot and it will reach any emirate in up to 3 business days, free of delivery charges on orders from AED 300. Choose cash on delivery or pay in instalments with Tabby or Tamara. If the item is defective or not what you ordered, you have 14 days to return it; please report any shipping damage within 48 hours of delivery.
Browse more RAM (Random Access Memory) at Totot, or see the official Lexar page for full product details.
Technical Specifications
- Model: Lexar THOR OC DDR5 Desktop Memory (non-RGB), 32GB kit, black
- Part number: LD5U16G60C38LG-RGD
- Capacity: 32GB kit (2 x 16GB)
- Interface: 288-pin UDIMM, DDR5
- Speed: 6,000MT/s
- CAS latency / voltage: CL38-48-48-96 at 1.35V
- Profiles: Intel XMP 3.0 and AMD EXPO
- Heatsink: 1.6mm solid aluminium, no RGB
- Dimensions (L x W x H): 138.3 x 40.8 x 7.6mm with heat spreader
- Stability features: On-die ECC, on-board PMIC
- Operating temperature: 0°C to 85°C (surface)
- Storage temperature: -55°C to 100°C
- Warranty: 1-year warranty from Totot
FAQ
Does the Lexar THOR DDR5 32GB 6000 kit have RGB lighting?
No. It is the non-RGB THOR model with a plain black aluminium heatsink.
Is it the THOR OC kit?
Yes. Lexar lists LD5U16G60C38LG-RGD (32GB kit, 6,000MT/s CL38) on its THOR OC DDR5 page, and UAE retailers often call it simply Lexar THOR DDR5.
Will it work with AMD EXPO?
Yes. It supports AMD EXPO and Intel XMP 3.0.
How tall is it?
40.8mm with the heat spreader, per Lexar’s dimensions of 138.3 x 40.8 x 7.6mm.
Can I add a different 16GB stick later?
No guarantee. Lexar says the rated specs may not hold when modules from other kits or brands are mixed.
Is this the CL32 version?
No. This part is rated CL38-48-48-96 at 1.35V; the CL32 THOR OC kit has a different part number.
No products in the cart.
Reviews
There are no reviews yet