The JONR X1 Max is JONR’s flagship robot vacuum and mop. JONR rates it at 20,000Pa of suction and pairs LiDAR navigation with dual-line laser sensors and an AI vision system that, according to JONR, recognises more than 100 types of obstacles. Two rotating microfibre mops scrub hard floors, and the base station washes them with 75°C water, dries them with 45°C hot air and empties the robot into a 2.5L dust bag that JONR says lasts 60 days or more.

Table of Contents
20,000Pa suction and a self-cutting roller brush
JONR lists 20,000Pa of suction for the JONR X1 Max, the highest figure in JONR’s robot range, and describes it as deep removal of dust and debris on carpets and hard floors. The main brush is what JONR calls a self-cutting roller brush, designed so that long hair and pet fur are cut rather than left wrapped around the brush. JONR also describes dual robotic arms aimed at reaching edges and corners where round robots usually leave a strip of dust. JONR does not tie the 20,000Pa figure to a named suction mode on its page.
Dual rotating mops with hot-water washing
Mopping is handled by two rotating mop pads made of antibacterial microfibre. A spinning, pressed pad shifts dried drink marks and sticky spots on tiles better than a cloth dragged behind the robot, and JONR adds AI-powered stain detection to the JONR X1 Max to spot dirty areas. After a run, the base station washes the mops with water heated to 75°C, which loosens grease far better than cold water, and then dries them with 45°C hot air so they do not stay damp and start to smell in a warm, humid apartment.
LiDAR, dual-line lasers and AI vision
Navigation combines three systems. LiDAR builds the map of the home, dual-line laser sensors look at what is low in front of the robot, and an AI vision system classifies objects. JONR says this lets the JONR X1 Max recognise more than 100 types of obstacles, and you can set virtual barriers and cleaning zones for each room. The robot climbs obstacles up to 25mm (1.0 inch), which covers most door sills and rug edges. Cables and socks are still better picked up before a run, as no robot recognises every object every time.
Self-emptying base and a 2.5L antibacterial bag
The base station of the JONR X1 Max empties the robot’s dust box into a 2.5L antibacterial dust bag. JONR says one bag supports about 60 days of operation without emptying, though that depends on how dusty the home is and how often the robot runs. A HEPA filter in the robot traps fine dust. The base measures 350 x 457 x 427mm, so plan a spot against a wall, near a socket, with clear floor in front for docking. JONR does not publish the clean and dirty water tank capacities of the base on its product page.
Battery, noise and smart-home control
JONR lists a 5,200mAh battery in a 4S2P layout but does not publish a runtime or charging time. The robot measures 350 x 350 x 97mm and JONR gives a weight of 12.65kg. JONR states noise of 61dB or less, and voice control through Amazon Alexa and Google Home. The JONR X1 Max carries TÜV, CE and FCC safety certifications according to JONR, and the box contains the robot, the base station, two mop pods, a side brush, a dust box, a main brush, a HEPA filter and a dust bag.
Who This Is Not For
The JONR X1 Max is not for homes with thresholds higher than 25mm, its climbing limit. It is not for anyone who needs a published runtime, water tank size or station voltage before buying, because JONR does not list them. Furniture with less than 97mm of clearance blocks it, and the 350 x 457 x 427mm base needs a permanent place by a wall. Dust bags, mop pads and the HEPA filter are consumables that need replacing over time, and JONR does not publish a mop-lifting height for rugs on its page.
Ordering from Totot
Totot sells the JONR X1 Max brand-new and genuine in its sealed box, backed by a 1-year warranty from Totot. We deliver UAE-wide in up to 3 business days, and delivery is free on orders from AED 300, with cash on delivery or instalments via Tabby and Tamara. Items that arrive defective or not as ordered can be returned within 14 days, and any shipping damage should be reported within 48 hours of delivery. Browse more in our Vacuums & Floor Care range, or see the official JONR X1 Max product page.
JONR X1 Max Specifications
- Model: JONR X1 Max
- Suction: 20,000Pa
- Navigation: LiDAR + dual-line laser sensors + AI vision
- Obstacle recognition: 100+ types (per JONR)
- Climbing: Up to 25mm (1.0 inch)
- Main brush: Self-cutting roller brush (anti-tangle)
- Mops: Dual rotating antibacterial microfibre pads
- Mop washing: 75°C hot water
- Mop drying: 45°C hot air
- Auto-empty: 2.5L antibacterial dust bag, about 60 days per bag (per JONR)
- Filter: HEPA
- Battery: 5,200mAh, 4S2P
- Runtime: Not published by JONR
- Noise: 61dB or less (per JONR)
- Voice control: Amazon Alexa, Google Home
- Robot size: 350 x 350 x 97mm
- Base size: 350 x 457 x 427mm
- Weight: 12.65kg (JONR figure)
- Certifications: TÜV, CE, FCC (per JONR)
- In the box: Robot, base station, 2 mop pods, side brush, dust box, main brush, HEPA filter, dust bag
- Warranty: 1-year warranty from Totot
JONR X1 Max FAQ
How strong is the JONR X1 Max suction?
20,000Pa, according to JONR.
What temperature does the base wash the mops at?
75°C for washing, followed by 45°C hot-air drying.
How high can the JONR X1 Max climb?
25mm (1.0 inch), enough for most door sills and rug edges.
How long does one dust bag last?
60 days or more, according to JONR, depending on how dusty the home is.
Does it work with Alexa and Google Home?
Yes. JONR lists voice control through Amazon Alexa and Google Home.
How long does the battery last?
JONR does not publish a runtime; it lists a 5,200mAh 4S2P battery.
Is it genuine?
Yes. We sell the genuine JONR X1 Max, brand-new in its sealed box.
How long does delivery take?
No more than 3 business days to any emirate, free from AED 300; the live fee for your order appears at checkout.



















Reviews
There are no reviews yet