The JBL Bar 1000MK2 is a complete home cinema in three parts: a long soundbar, a 10-inch wireless subwoofer and two surround speakers that clip onto the ends of the bar. Pull the surrounds off, put them behind the sofa and they play on battery; clip them back and they recharge. JBL rates the system at 7.1.4 channels and 960W maximum output (480W RMS), with Dolby Atmos and DTS:X, three HDMI inputs and an eARC output to the TV. It also streams music over Wi-Fi with AirPlay, Google Cast, Spotify Connect, Tidal Connect and Roon Ready.
Table of Contents
7.1.4 channels and 960W max output
JBL rates the JBL Bar 1000MK2 at 960W maximum output in total at 1% THD, or 480W RMS: 500W maximum from the soundbar, 2 × 80W from the two surround speakers and 300W from the subwoofer. The frequency response is 33Hz to 20kHz at −6dB. Inside the bar are six 44 × 80mm racetrack drivers, two 1-inch tweeters and two 2.75-inch up-firing full-range drivers that bounce height effects off the ceiling. Each surround carries two 44 × 90mm racetrack drivers and two 2.75-inch up-firing drivers of its own, and the subwoofer uses a 10-inch (260mm) driver. That is where the 7.1.4 figure comes from: four up-firing channels in total, two in the bar and one pair in the rears.

Detachable surround speakers on battery
The surrounds are the feature that sets the JBL Bar 1000MK2 apart from most soundbars. During the day they stay on the bar and widen the front soundstage. For a film, you detach them and place them behind or beside the seating, with no speaker cable to run. Each surround has a 6600mAh lithium battery, and JBL quotes up to 10 hours of playtime, noting that the figure varies with content and volume. When you are done, you clip them back onto the ends of the bar, where they charge. JBL also lists a broadcasting mode that lets the detached surrounds play music in another spot.

HDMI, eARC and the TV connection
The bar has three HDMI inputs and one HDMI output with eARC, with HDCP 2.3 and passthrough for Dolby Vision and HDR10+ at 4K. That means a console, a streaming box and a satellite receiver can all plug into the JBL Bar 1000MK2, with a single cable to the TV carrying picture out and sound back. There is also an optical input for older TVs. A USB port is listed, but JBL states that USB playback works only on the US version; in other regions the port is for service. JBL does not list 8K passthrough.
Sound processing and room calibration
JBL fits several sound modes to the JBL Bar 1000MK2. MultiBeam 3.0 widens the soundstage from the front of the room, PureVoice 2.0 lifts dialogue above music and effects, and SmartDetails adds clarity to small sounds. Automatic room calibration measures the room and adjusts the output to it, and a night listening mode mutes the bar and subwoofer so the detached surrounds, placed in front of you, play for one or two listeners. Setup and a detailed equaliser are in the JBL ONE app, and the bar works with Google Assistant or Siri through a linked voice-enabled device.

Wi-Fi, Bluetooth and streaming
For music, JBL lists dual-band Wi-Fi 6 (802.11a/b/g/n/ac/ax on 2.4 and 5GHz) and Bluetooth 5.3. Over Wi-Fi you can use AirPlay from an iPhone or Mac, Google Cast from Android and Chrome, Spotify Connect, Tidal Connect and Roon Ready. Streaming over Wi-Fi keeps the phone free for calls and avoids the range limits of Bluetooth, while Bluetooth stays handy for a guest who wants to play a song quickly.

Size and weight
The soundbar on its own measures 854 × 52 × 128mm and weighs 5.5kg; with both surrounds attached the full bar is 1203mm wide. Each surround is 189 × 52 × 128mm and 0.9kg. The subwoofer is 325 × 400 × 325mm and weighs 9.1kg. The 52mm height lets the JBL Bar 1000MK2 sit in front of most TVs on a stand without blocking the screen, and the box includes wall brackets for the bar and the surrounds. Before buying, measure the TV unit: at 1203mm, the bar is best matched with a 65-inch TV or larger.
Who This Is Not For
The JBL Bar 1000MK2 is not for a small bedroom or a studio apartment: a 9.1kg subwoofer and a 1203mm-wide bar are sized for a living room. It is not for anyone who needs 8K passthrough, because JBL lists 4K with Dolby Vision and HDR10+ only. The surrounds run on battery for up to 10 hours, so anyone wanting permanently wired rear speakers may prefer a receiver setup. USB playback is limited to the US version.
Ordering from Totot
Totot sells the JBL Bar 1000MK2 brand-new and genuine in its sealed box, backed by a 1-year warranty from Totot. Delivered across the UAE in up to 3 business days, free on orders from AED 300, with cash on delivery or instalments via Tabby and Tamara. Items that arrive defective or not as ordered can be returned within 14 days, and any shipping damage should be reported within 48 hours of delivery. Browse more in our Speakers range, or see the official JBL Bar 1000MK2 product page.
JBL Bar 1000MK2 Specifications
- Model: JBL Bar 1000MK2
- Channels: 7.1.4
- Total power: 960W max at 1% THD (bar 500W, surrounds 2 × 80W, subwoofer 300W); 480W RMS at 1% THD
- Soundbar drivers: 6 × 44 × 80mm racetrack, 2 × 1-inch tweeters, 2 × 2.75-inch up-firing
- Surround drivers (each): 2 × 44 × 90mm racetrack, 2 × 2.75-inch up-firing
- Subwoofer: 10-inch (260mm), wireless
- Surround battery: 6600mAh lithium, up to 10 hours (varies with content and volume)
- Frequency response: 33Hz–20kHz (−6dB)
- Audio formats: Dolby Atmos, DTS:X
- HDMI: 3 inputs, 1 output with eARC, HDCP 2.3
- Video passthrough: 4K with Dolby Vision and HDR10+
- Other inputs: Optical, Bluetooth, USB (playback on US version only)
- Wi-Fi: 802.11a/b/g/n/ac/ax, 2.4GHz and 5GHz
- Bluetooth: 5.3
- Streaming: AirPlay, Google Cast, Spotify Connect, Tidal Connect, Roon Ready
- Soundbar size: 854 × 52 × 128mm (1203mm wide with surrounds), 5.5kg
- Surround size: 189 × 52 × 128mm, 0.9kg each
- Subwoofer size: 325 × 400 × 325mm, 9.1kg
- In the box: Soundbar, 2 detachable surrounds, subwoofer, remote with batteries, power cords, HDMI cable, wall brackets, 4 side caps
- Warranty: 1-year warranty from Totot
JBL Bar 1000MK2 FAQ
Is the JBL Bar 1000MK2 7.1.4 or 9.1.4?
7.1.4, according to JBL. Four of those channels are up-firing height drivers.
How much power does the JBL Bar 1000MK2 have?
960W maximum in total at 1% THD (500W bar, 2 × 80W surrounds and 300W subwoofer), and 480W RMS.
Do the surround speakers need charging?
Yes. They play for up to 10 hours on battery when detached, then charge when clipped back onto the bar.
Does the JBL Bar 1000MK2 pass through 8K?
No. JBL lists 4K passthrough with Dolby Vision and HDR10+, and does not mention 8K.
How many HDMI inputs does it have?
3 HDMI inputs plus 1 HDMI output with eARC.
Does it work with AirPlay and Google Cast?
Yes. JBL lists AirPlay, Google Cast, Spotify Connect, Tidal Connect and Roon Ready over Wi-Fi.
Is it genuine?
Yes. We sell the genuine JBL Bar 1000MK2, brand-new in its sealed box.
How long does delivery take?
Up to 3 business days anywhere in the UAE, free on orders from AED 300; any current delivery fee for your order is shown at checkout.

















Reviews
There are no reviews yet