The DJI RS 3 Mini is DJI’s lightweight three-axis stabiliser for mirrorless cameras. It weighs 795 g in its portrait configuration, carries a tested payload of 0.4 to 2 kg, and DJI names the Sony A7 series with the 24-70mm F2.8 GM lens as an example of the camera and lens pairs it supports. It switches to vertical shooting without extra accessories, starts and stops recording over Bluetooth, and runs for up to 10 hours on its built-in battery, according to DJI.
Table of Contents
What the DJI RS 3 Mini Is Built For
Handheld footage from a mirrorless camera shakes with every step, and in-body stabilisation only goes so far once you walk, turn or climb stairs. A three-axis gimbal holds the camera level on pan, tilt and roll with brushless motors, so a walking shot looks like it was filmed on a slider. The DJI RS 3 Mini brings that to solo creators who want a rig light enough to carry all day.
DJI pairs those motors with its third-generation RS stabilisation algorithm and a maximum controlled rotation speed of 360° per second on all three axes. In practice the DJI RS 3 Mini suits travel films, weddings, real-estate walk-throughs, product shots and social videos shot by one person.
Payload: Which Cameras the DJI RS 3 Mini Carries
DJI quotes a tested payload of 0.4 to 2 kg. That range covers most full-frame and APS-C mirrorless bodies with a standard zoom or a prime lens; DJI’s own example is a Sony A7-series body with the 24-70mm F2.8 GM. Before buying, check your exact body and lens on DJI’s RS series compatibility list, because the balance point of a long or front-heavy lens matters as much as its weight.
Weight and size: 795 g in portrait mode and 850 g in horizontal shooting mode, plus about 128 g for the extended grip and tripod. Folded, the DJI RS 3 Mini measures 323 × 195 × 98 mm, small enough for a backpack side pocket or a cabin bag.
Native Vertical Shooting Without Extra Parts
Vertical video for Reels, TikTok and Shorts usually means cropping a horizontal frame or buying a separate bracket. On this gimbal you move the quick-release plate to the vertical arm and the camera sits in portrait orientation, keeping the full sensor resolution in the 9:16 frame. Switching back to horizontal is the reverse step, with no tools or extra plates.
The roll axis covers −95° to +240°, the tilt axis −110° to +210°, and pan rotates a full 360° continuously, which also leaves room for 3D Roll 360 spins and low underslung angles.
Camera Control: Bluetooth Shutter and Cable
After a one-time pairing, the DJI RS 3 Mini controls supported cameras over Bluetooth, with no cable between gimbal and camera. A half press on the camera control button triggers autofocus, a single press starts or stops recording, and a long press takes a photo. The camera reconnects automatically after the first pairing, and one camera connects at a time.
For cameras that need a wired link, DJI includes an L-shaped multi-camera control cable with USB-C, 30 cm long. A 1.4-inch full-colour touchscreen on the handle shows settings and modes, and a NATO port takes accessories such as a briefcase handle, a light or a microphone.
Modes, Battery and Charging
The M button cycles three gimbal modes: Pan Follow, Pan and Tilt Follow, and FPV, with 3D Roll 360 and Custom modes also available, plus selfie, sport, underslung and flashlight positions through button shortcuts. In the DJI Ronin app you get Panorama, Timelapse and Track.
The built-in 2450 mAh battery (17.64 Wh) runs for up to 10 hours, a figure DJI measures with the gimbal balanced and stationary, so expect less while moving. A full charge takes about 2.5 hours at 5 V / 2 A over USB-C, and the gimbal can be used while charging, for example from a power bank on a long event.
Who This Is Not For
Anyone with a heavy setup: above 2 kg, such as a cinema camera, a large telephoto or a matte box rig, you need DJI’s larger RS gimbals. Filmmakers who rely on the RS ecosystem: DJI lists focus motors, the LiDAR Range Finder, the image transmitter, ActiveTrack and the 3D Focus System as not compatible with the DJI RS 3 Mini, and its quick-release plate is specific to this model.
The battery is built into the grip and cannot be swapped, fast charging is not supported, and the gimbal is neither waterproof nor dustproof, so rain and sand call for care. DJI also states software support for this model until 31 December 2026.
Order the DJI RS 3 Mini in the UAE
We deliver to all seven emirates in up to 3 business days, free on orders from AED 300. The DJI RS 3 Mini comes with a 1-year warranty from Totot, and a defective or non-matching item can be returned within 14 days; shipping damage should be reported within 48 hours of delivery. In the box you get the gimbal, the RS Mini tripod, the RS Mini quick-release plate, a 40 cm USB-C charging cable, the multi-camera control cable and a screw kit.
Technical Specifications
- Model: DJI RS 3 Mini
- Type: 3-axis handheld gimbal for mirrorless cameras
- Tested payload: 0.4-2 kg
- Gimbal weight: 795 g in portrait mode, 850 g in horizontal shooting mode
- Extended grip / tripod: Approx. 128 g
- Folded size: 323 × 195 × 98 mm (excluding grip/tripod)
- Unfolded size: 180 × 159 × 296 mm (excluding camera and grip/tripod)
- Max controlled rotation speed: 360°/s on pan, tilt and roll
- Mechanical range: Pan 360° continuous; roll −95° to +240°; tilt −110° to +210°
- Stabilisation: 3rd-generation RS stabilisation algorithm
- Display: 1.4-inch full-colour touchscreen
- Battery: HB7-2450mAh-7.2, 18650 Li-ion 2S, 2450 mAh, 17.64 Wh
- Operating time: Up to 10 hours (balanced, stationary)
- Charging: Approx. 2.5 hours at 5 V / 2 A, USB-C port
- Camera control: Bluetooth shutter control; wired via multi-camera control cable
- Bluetooth: 5.1
- Operating temperature: −10 °C to 45 °C
- App: DJI Ronin (iOS 11.0 or above, Android 7.0 or above)
- In the box: Gimbal, RS Mini tripod, RS Mini quick-release plate, USB-C charging cable (40 cm), L-shaped multi-camera control cable (USB-C, 30 cm), screw kit
- Warranty: 1-year warranty from Totot
Specifications come from DJI’s official RS 3 Mini specs page, product page, FAQ and online store listing. Full details are published on the official DJI RS 3 Mini specifications page.
FAQ
Can the DJI RS 3 Mini carry a full-frame camera?
Yes, within its 0.4-2 kg tested payload. DJI’s example is a Sony A7-series body with the 24-70mm F2.8 GM lens.
Does it need an accessory for vertical video?
No. You mount the quick-release plate on the vertical arm and shoot in portrait without extra parts.
How long does the battery last?
10 hours at most, measured by DJI with the gimbal balanced and stationary; moving shots use more power.
Can I swap the battery?
No. The battery is built into the grip; you can charge over USB-C and keep using the gimbal while it charges.
Does the DJI RS 3 Mini support ActiveTrack or focus motors?
No. DJI lists ActiveTrack, focus motors, the LiDAR Range Finder, the image transmitter and the 3D Focus System as not compatible.
Is it waterproof?
No. DJI states the gimbal is not waterproof or dustproof.
Browse more in our Camera Accessories range. Every order from Totot carries a 1-year warranty covering manufacturing defects, with our 14-day return policy for defective or non-compliant items, and nationwide UAE delivery.
No products in the cart.
Reviews
There are no reviews yet