The Soundcore Boom 2 is Anker’s mid-size outdoor speaker, sitting between pocket speakers and full party boomboxes. Its core is a dedicated 50W racetrack subwoofer paired with two 15W tweeters. Standard output is 60W, and Anker says it reaches 80W when BassUp 2.0 is on. Add an IPX7 body that floats and a battery rated for up to 24 hours under set conditions, and it suits beach days, desert trips and garden evenings.
Table of Contents
A Dedicated Subwoofer in a Portable Speaker
What sets the Soundcore Boom 2 apart from most portable speakers in its class is a separate oval racetrack subwoofer rated at 50W, working alongside two 15W tweeters with crossover tuning. The subwoofer carries drums and bass lines while voices and sharper instruments stay clear outdoors. Anker lists SBC as the Bluetooth codec and does not publish a frequency response for this model, so treat any range quoted elsewhere with caution.
BassUp 2.0: From 60W to 80W
Press the BassUp button and the Soundcore Boom 2 goes from 60W to 80W, according to Anker, with a deeper, heavier low end. That 80W is the ceiling in BassUp mode, not a constant output. BassUp also drains the battery faster, so it suits short parties more than a long trip away from power. If you prefer to tune by hand, the soundcore app offers a customizable pro EQ, along with firmware updates and settings.
IPX7 and Floating: The Port Cover Matters
The Soundcore Boom 2 is rated IPX7, and Anker confirms that it floats. The condition is that the rubber cover over the charging port is sealed tightly before the speaker goes in the water; left open, water can get inside. After a sea swim, rinse it in fresh water and dry the port before charging. The X means dust resistance was not tested, so a soft brush after a beach or desert trip keeps sand out of the grille.
Battery, Recharging and Phone Top-Ups
Anker rates the Soundcore Boom 2 at up to 24 hours at 50% volume with BassUp and the light effects off, and notes that content, custom EQ and volume all change the result. Recharging takes about 5.5 hours with a certified 15W (5V/3A) wall charger, which is not included; the box has a 60cm USB-C to USB-C cable. The speaker can also top up a phone at 5W, which is slow and best kept for emergencies.
Lights, PartyCast 2.0 and the Built-In Microphone
Seven preset light effects pulse with the music; holding BassUp for about two seconds cycles them, and a double press turns them off. PartyCast 2.0 links 100+ PartyCast-enabled speakers, and TWS pairs two Boom 2 units as left and right channels for true stereo. Anker lists Bluetooth 5.3 in its FAQ and states the speaker has a built-in microphone. There is no AUX input, so every source connects wirelessly.
Who This Is Not For
The Soundcore Boom 2 is not for anyone who wants to plug in an older player by cable, because it has no AUX input. Recharging is slow at about 5.5 hours with a 15W charger that is not included, and phone charging is only 5W. Dust resistance is not tested, and 24 hours is not realistic with high volume, BassUp and lights all on. For a very large crowd, the Soundcore Boom 2 Plus is the better fit.
Ordering from Totot
Totot sells the Soundcore Boom 2 brand-new and genuine in its sealed box, backed by a 1-year warranty from Totot. It reaches any emirate within 3 business days at most, with free delivery on orders from AED 300, with cash on delivery or instalments via Tabby and Tamara. Items that arrive defective or not as ordered can be returned within 14 days, and any shipping damage should be reported within 48 hours of delivery. Browse more in our Portable Speaker range, or see the official soundcore Boom 2 product page.
Soundcore Boom 2 Specifications
- Model: Anker Soundcore Boom 2
- Output: 60W standard; up to 80W with BassUp 2.0
- Drivers: 50W racetrack subwoofer + 2 × 15W tweeters
- Playtime: up to 24 hours at 50% volume, BassUp and lights off
- Recharging: about 5.5 hours with a 15W (5V/3A) charger (not included)
- Power bank output: 5W
- Water resistance: IPX7, floats (port cover sealed)
- Lights: 7 preset beat-synced effects
- Connectivity: Bluetooth 5.3 (per Anker’s FAQ), SBC codec
- Multi-speaker: PartyCast 2.0 (100+ speakers), TWS stereo pairing
- Microphone: yes, built in
- Wired input: none (no AUX)
- Frequency response, weight and dimensions: not published by Anker
- In the box: speaker, 60cm USB-C to USB-C cable, quick start guide
- Warranty: 1-year warranty from Totot
Soundcore Boom 2 FAQ
What is the real output of the Soundcore Boom 2?
60W in standard mode, rising to 80W with BassUp 2.0 switched on, according to Anker.
Does the Soundcore Boom 2 have an AUX input?
No. It connects over Bluetooth only, and the USB-C port is for charging.
How long does the Soundcore Boom 2 battery last?
24 hours at most, at 50% volume with BassUp and lights off; louder playback shortens it.
Does the Soundcore Boom 2 float?
Yes. It is rated IPX7 and floats, provided the port cover is sealed tightly first.
Can I pair two speakers?
Yes. TWS pairs two Boom 2 units for stereo, and PartyCast 2.0 links 100+ compatible speakers.
Is it genuine?
Yes. We sell the genuine Anker Soundcore Boom 2, brand-new in its sealed box.
How long does delivery take?
3 business days at most across the UAE. Orders from AED 300 ship free, and the checkout page shows any current fee for your order.
No products in the cart.
Reviews
There are no reviews yet