The addlink P4 32GB DDR4 3200 is a single 32GB DDR4 desktop module from addlink’s P4 Value Series, rated at 3200 MT/s with CL22 timings and 1.2 V. This 288-pin UDIMM runs at JEDEC speed on Intel and AMD DDR4 desktops without XMP or EXPO, and addlink makes it in Taiwan. Totot ships it from stock in the UAE.
Table of Contents
Where the addlink P4 32GB DDR4 3200 fits
Not every upgrade is about speed. On a DDR4 workstation that already runs at 3200 MT/s, the thing that usually runs out first is capacity: large Excel models, accounting software with a local database, a few virtual machines, or photo libraries open in an editor. The addlink P4 32GB DDR4 3200 puts 32GB on one stick, so a board with two slots can reach 64GB and a four-slot board can reach 128GB where the motherboard and CPU support it.
addlink builds the P4 as its value DDR4 line. It is a non-overclocking module that runs at JEDEC speed, which means no profile to enable and no tuning. addlink states that the chips are quality parts, fully tested for reliability, and that the module is intended for everyday computing, office work and light gaming.
One addlink P4 32GB DDR4 3200 or two 16GB sticks?
Two 16GB modules in dual channel give the same 32GB total with full bandwidth, but they use two slots. A single 32GB module leaves slots free for later and is the better choice on small boards with only two DIMM slots, because you can add a second 32GB module later for 64GB in dual channel.
If your PC already has one 32GB stick, a second addlink P4 32GB DDR4 3200 is the cleanest match. If it has smaller sticks, the system still works, but every module runs at the timings of the slowest one, and mixed sizes can limit dual-channel operation on some boards. Check your motherboard manual for the maximum capacity per slot before ordering, since older DDR4 platforms may not accept 32GB modules.
3200 MT/s at CL22, explained simply
3200 MT/s is the transfer rate and CL22 is the number of clock cycles the module waits before it returns data. These are JEDEC standard values, so most Intel and AMD DDR4 desktops run the module at full speed straight away. Faster gaming kits use XMP profiles with tighter timings and higher voltage; the P4 keeps to 1.2 V, which addlink links to lower power use and long-term stability.
For office, school and home tasks the difference between CL22 and a tuned gaming kit is small in daily use. What you notice with the addlink P4 32GB DDR4 3200 is the extra headroom: fewer slow-downs when many programs are open at once.
Fitting and first boot
Before fitting the addlink P4 32GB DDR4 3200, switch the PC off at the wall, ground yourself on the case and open the panel. Release the slot clips, align the notch, and press the module straight down until both clips snap shut. On first boot some boards run a short memory training cycle, so the screen may stay dark a little longer than usual. Then check the new total in Windows Task Manager under Performance, Memory.
Who This Is Not For
Skip the addlink P4 32GB DDR4 3200 if your computer is a laptop or mini PC with SO-DIMM slots, or if your motherboard is DDR5 or DDR3; the module will not fit. It is also the wrong pick for builders chasing high-frequency gaming memory, matching RGB or heat spreaders, and for servers that require ECC registered DIMMs. Some older DDR4 boards cap each slot at 16GB, so confirm 32GB-per-slot support first. addlink notes that results vary with motherboard, CPU, BIOS and configuration.
Ordering the addlink P4 32GB DDR4 3200 in the UAE
This module is held in UAE stock by Totot. Delivery covers all seven emirates and takes up to 3 business days, and shipping is free once your order reaches AED 300. A module that arrives defective or different from your order can be returned within 14 days; please tell us about any transit damage within 48 hours of receiving the parcel. Payment options are cash on delivery, Tabby and Tamara.
Browse more RAM (Random Access Memory) at Totot, or see the official addlink page for full product details.
Technical Specifications
- Product: addlink P4 DDR4 Value Memory, 32GB
- Series: addlink P4 Value Series (non-overclocking)
- Module type: DDR4 UDIMM, 288-pin (desktop)
- Capacity: 32GB (single module)
- Speed: 3200 MT/s (JEDEC standard, no XMP or EXPO profile needed)
- CAS latency: CL22
- Voltage: 1.2 V
- Capacity options in the series: 16GB, 32GB
- Dimensions: 133.7 x 41 mm (per addlink datasheet)
- Platforms: Intel and AMD DDR4 desktop platforms
- Made in: Taiwan
- Warranty: 1-year warranty from Totot
FAQ
How much memory can I reach with the addlink P4 32GB DDR4 3200?
64GB with two modules, or 128GB with four, if your motherboard and CPU support that capacity.
Is this a single 32GB module?
Yes. The listing is one 32GB DDR4 UDIMM, not a 2 x 16GB kit.
Does it need XMP or EXPO?
No. It runs at the JEDEC standard 3200 MT/s CL22 at 1.2 V without any profile.
Will it work on an older DDR4 board limited to 2666 MT/s?
Yes, if the board accepts 32GB modules. It will run at the board’s highest supported speed.
Is it good for gaming?
Yes for light and casual gaming, as addlink states. For competitive gaming, faster DDR4 kits with XMP suit better.
Is the 32GB P4 the same design as the 16GB P4?
Yes. Same P4 series, speed, timings and voltage; only the capacity differs.
No products in the cart.
Reviews
There are no reviews yet