The ZOTAC RTX 5060 Twin Edge OC is the factory-overclocked version of ZOTAC’s compact twin-fan GeForce RTX 5060, model ZT-B50600H-10M, with 8GB of GDDR7 and a 2527 MHz engine clock. ZOTAC labels it SFF-Ready: it is 220.5 mm long, two slots thick, draws power from one 8-pin connector and is happy with a 550W power supply. Totot has it in stock in the UAE, ready to ship.
Table of Contents
What the OC means on the ZOTAC RTX 5060 Twin Edge OC
ZOTAC builds two black Twin Edge versions of the RTX 5060. The standard Twin Edge (ZT-B50600E-10M) runs a 2497 MHz engine clock, while this OC model is set to 2527 MHz at the factory. That is 30 MHz more with nothing to configure: the card boots at the higher clock, keeps the same 145W power rating and the same single 8-pin input. The gain in games is modest, a few frames rather than a new performance class, but it comes free of tuning work and stays within ZOTAC’s own validated settings.
Underneath sits NVIDIA’s Blackwell-based GeForce RTX 5060 with 3,840 CUDA cores and DLSS 4 support, the same GPU found on every RTX 5060 board.
Made for small form factor builds
The ZOTAC RTX 5060 Twin Edge OC measures 220.5 × 120.25 × 41.6 mm and occupies two expansion slots. That size is the reason ZOTAC gives it the SFF-Ready label, which points to mini-ITX and compact micro-ATX cases where a long triple-fan card simply will not fit. Two BladeLink fans push air through an air-cooled heatsink, and a metal backplate stiffens the board and protects the rear components during installation.
Before ordering for a small case, check two numbers in your case manual: maximum GPU length (at least 221 mm) and the number of slots available below the PCIe slot (at least 2).
Gaming performance and memory
On the ZOTAC RTX 5060 Twin Edge OC, ZOTAC pairs the GPU with 8GB of GDDR7 on a 128-bit bus running at 28 Gbps, connected over PCI Express 5.0 x8. DirectX 12 Ultimate and OpenGL 4.6 are supported. With these numbers the ZOTAC RTX 5060 Twin Edge OC is built for 1080p at high refresh rates and for 1440p with DLSS switched on. Fast esports titles, racing games and most open-world releases at sensible settings are its home ground.
Keep an eye on video memory: some recent games at their highest texture setting go past 8GB, and lowering textures by one level keeps frame times smooth.
Power, outputs and monitors
ZOTAC rates the ZOTAC RTX 5060 Twin Edge OC at 145W and recommends a 550W power supply with one 8-pin PCIe cable, so most existing PSUs need no upgrade and no 16-pin adapter is involved. For displays there are three DisplayPort 2.1b ports with UHBR20 and one HDMI port, with HDCP 2.3 and up to four screens running at the same time.
First setup and FireStorm on the ZOTAC RTX 5060 Twin Edge OC
ZOTAC lists Windows 11 and Windows 10 64-bit (version 1809 or later) as supported systems. Fit the card in the main PCIe x16 slot, connect the 8-pin cable, attach the monitor to the card, then install the current GeForce driver. ZOTAC’s FireStorm utility, a free download, shows clock speeds and temperatures and lets you set fan curves. The box itself contains the card and a user manual.
Who This Is Not For
Skip the ZOTAC RTX 5060 Twin Edge OC if you want 4K gaming at high settings or work with large AI models and 3D scenes that need more than 8GB of video memory; an RTX 5060 Ti 16GB or above fits those jobs. This listing is the black card; ZOTAC sells a separate White Edition. ZOTAC lists no RGB lighting. SLI is not supported. On a PCIe 3.0 motherboard the x8 link has less bandwidth than on PCIe 4.0 or 5.0 boards. Your power supply needs a free 8-pin PCIe cable.
Ordering in the UAE
Orders reach any emirate within up to 3 business days, and shipping costs nothing on orders from AED 300. You have 14 days to return a card that is defective or differs from what you ordered, and damage from transit should be reported within 48 hours of delivery. Payment options are cash on delivery, Tabby or Tamara.
Browse more Graphics Cards at Totot, or see the official ZOTAC page for full product details.
Technical Specifications
- Model: ZOTAC GAMING GeForce RTX 5060 Twin Edge OC
- Model number: ZT-B50600H-10M
- Colour: black
- GPU: NVIDIA GeForce RTX 5060 (Blackwell, DLSS 4)
- CUDA cores: 3,840
- Engine clock: 2527 MHz (factory overclocked)
- Video memory: 8GB GDDR7
- Memory bus / clock: 128-bit / 28 Gbps
- Interface: PCI Express 5.0 x8
- Outputs: 3 × DisplayPort 2.1b with UHBR20, 1 × HDMI
- HDCP: 2.3
- Multi-display: up to 4 displays
- Power consumption: 145W
- Recommended power supply: 550W
- Power input: 1 × 8-pin
- Cooling: air cooled, 2 BladeLink fans, metal backplate
- Form factor: SFF-Ready, 2 slots
- Dimensions: 220.5 × 120.25 × 41.6 mm
- APIs: DirectX 12 Ultimate, OpenGL 4.6
- SLI: not supported
- Supported OS: Windows 11, Windows 10 64-bit (v1809 or later)
- In the box: graphics card, user manual
- Warranty: 1-year warranty from Totot
FAQ
How much faster is the ZOTAC RTX 5060 Twin Edge OC than the standard Twin Edge?
30 MHz on the engine clock: 2527 MHz on the OC versus 2497 MHz on the standard ZT-B50600E-10M. Everything else on ZOTAC’s spec sheet is the same.
Will the ZOTAC RTX 5060 Twin Edge OC fit a mini-ITX case?
Yes, in most cases. ZOTAC labels it SFF-Ready at 220.5 mm long and 2 slots thick; confirm your case’s GPU length limit first.
What power supply do I need?
550W, per ZOTAC, with one 8-pin PCIe cable. The card is rated at 145W.
Does it need a 16-pin (12V-2×6) cable?
No. It uses a single standard 8-pin connector.
Is this the white version?
No. This is the black ZT-B50600H-10M; the White Edition is a separate model.
Does it support DLSS 4?
Yes. ZOTAC lists the Blackwell architecture with DLSS 4 support.
No products in the cart.
Reviews
There are no reviews yet