Description

The Dyson Airstrait HT01 Nickel Copper is Dyson’s wet-to-dry straightener in its signature bright nickel and rich copper finish, the colour most people picture when they think of a Dyson hair tool. It looks like a classic plate straightener, but there are no hot plates inside: a powerful downward jet of air between the two arms dries and straightens the hair at the same time. You can use it on towel-dried hair straight after a shower, skipping the separate blow-dry, or on dry hair to refresh a style later in the day.

Dyson Airstrait HT01 Nickel Copper

Air instead of hot plates

A classic straightener clamps hair between two heated plates. The Dyson Airstrait HT01 Nickel Copper works differently: its Hyperdymium motor drives a 13-blade impeller at up to 106,000 rpm, pushing 11.9 litres of air per second out of the arms at a pressure of up to 3.6 kPa. Dyson says that is enough to straighten the hair while it dries. Because no hot metal surface presses on the hair, the tool relies on airflow and controlled heat together rather than contact heat alone.

Dyson Airstrait HT01 Nickel Copper

Wet mode and dry mode

The Dyson Airstrait HT01 Nickel Copper has two families of settings. Style from wet uses three preset temperatures, 80°C, 110°C and 140°C, for hair that has just been towel-dried; Dyson recommends choosing the temperature by hair type. Refresh from dry uses 120°C or 140°C for touch-ups on dry hair, and an optional Boost mode adds extra styling power for thick or resistant hair. Glass bead thermistors in the arms regulate the airflow temperature up to 30 times per second, according to Dyson’s Gulf product page.

Dyson Airstrait HT01 Nickel Copper

Smart pauses and the arm lock

When you stop moving the Dyson Airstrait HT01 Nickel Copper, auto-pause cuts the airflow after three seconds and restarts it as soon as you move again, so you are not blasting hot air into the air while you section hair. Dyson’s FAQ adds an auto-standby after five minutes of inactivity with the arms open, or three minutes with them locked. A sliding button locks the arms together; in that position you can gently pre-dry hair and lift the roots for volume before you start straightening.

Dyson Airstrait HT01 Nickel Copper

Why bright nickel and copper

Nickel with copper is Dyson’s classic colour combination, matching the original Supersonic and Airwrap, so the Dyson Airstrait HT01 Nickel Copper sits naturally beside other Dyson hair tools on a vanity. The silver-grey body is the most neutral of the Airstrait finishes and suits anyone who wants a tool that looks professional rather than decorative. Light scratches and water spots show less on brushed nickel than on dark blue, and the copper accents mark the controls clearly. The Dyson Airstrait HT01 Nickel Copper is also the simplest choice for a gift when you are not sure of the recipient’s taste.

Dyson Airstrait HT01 Nickel Copper

Size, weight and daily use

Dyson lists the Dyson Airstrait HT01 Nickel Copper at 330 mm long, 41 mm wide and 60 mm high, with a weight of 0.94 kg, which is heavier than a typical plate straightener because the motor sits inside. In daily use that means a routine of passing the tool slowly down each section of damp hair, rather than drying first and straightening afterwards. Dyson builds its hair tools for the voltage of the country they are sold in, and the user manual lists the electrical details for each unit.

Dyson Airstrait HT01 Nickel Copper

Who This Is Not For

The Dyson Airstrait HT01 Nickel Copper does not create curls or waves; it is for straight and smooth styles. At 0.94 kg it is noticeably heavier than a plate straightener, which can tire the arm on very long or thick hair. It is designed for towel-dried hair, not dripping-wet hair. It is a mains-powered tool with no battery, and like all Dyson hair tools it is built for the local voltage, so it is not meant for 110 V countries.

Ordering from Totot

Totot sells the Dyson Airstrait HT01 Nickel Copper brand-new and genuine in its sealed box, backed by a 1-year warranty from Totot. Delivered across the UAE in up to 3 business days, free on orders from AED 300, with cash on delivery or instalments via Tabby and Tamara. Items that arrive defective or not as ordered can be returned within 14 days, and any shipping damage should be reported within 48 hours of delivery. Browse more in our Beauty & Health range, or see the official Dyson Airstrait Nickel/Copper page (Dyson Gulf).

Dyson Airstrait HT01 Nickel Copper

Dyson Airstrait HT01 Nickel Copper Specifications

  • Model: Dyson Airstrait straightener HT01
  • Motor: Hyperdymium, 13-blade impeller, up to 106,000 rpm
  • Airflow: 11.9 L/s
  • Air pressure: Up to 3.6 kPa
  • Wet mode: 80°C, 110°C, 140°C
  • Dry mode: 120°C, 140°C, plus Boost
  • Heat control: Glass bead thermistors, up to 30 checks per second
  • Auto-pause: After 3 seconds without movement
  • Auto-standby: 5 min (arms open) / 3 min (arms locked)
  • Dimensions: 330 × 41 × 60 mm (L × W × H)
  • Weight: 0.94 kg
  • Colour: Bright Nickel/Rich Copper
  • Warranty: 1-year warranty from Totot

Dyson Airstrait HT01 Nickel Copper FAQ

Does the Dyson Airstrait HT01 Nickel Copper have hot plates?

No. It straightens with high-pressure airflow between the arms; there are no heated plates.

Can I use it on wet hair?

Yes, on towel-dried hair using the wet mode at 80, 110 or 140°C.

What temperatures does it use on dry hair?

120°C or 140°C, plus an optional Boost mode.

How heavy is it?

0.94 kg, according to Dyson.

Does it turn off by itself?

Yes. Airflow pauses after 3 seconds without movement, and the tool goes to standby after 5 minutes with the arms open.

Is the nickel/copper version different from the other colours?

No. Dyson lists the same specifications; only the finish changes.

Is it genuine?

Yes. We sell the genuine Dyson Airstrait HT01 in Bright Nickel/Rich Copper, brand-new in its sealed box.

How long does delivery take?

Up to 3 business days anywhere in the UAE, free on orders from AED 300; any current delivery fee for your order is shown at checkout.

Additional Information
Weight0.935 kg
Dimensions33 × 4.1 × 6 cm
Reviews

Reviews

There are no reviews yet

Be the first to review “Dyson Airstrait HT01 Wet-to-Dry Hair Straightener – No Hot Plates, Hyperdymium Motor, Wet and Dry Modes up to 140°C, Auto-Pause, Bright Nickel/Rich Copper”

Please complete all the fields below to tell us about your experience with this product.

Shipping & Returns & Customs Details

🚚 Shipping — Flat & Fast

  • 10 AED flat for any order — FREE on orders of 300 AED or more.
  • Order before 10 PM GST → processed within 24h, delivered by Aramex in up to 3 business days anywhere in the UAE.
  • Live tracking link by email/WhatsApp. Full Shipping Policy

↩️ 14-Day Returns

  • Our fault (defective / wrong / not as described / counterfeit): FREE return + 100% refund including shipping.
  • Change of mind: accepted within 14 days (unused, original packaging) — the customer bears the return shipping cost, and we deduct the original delivery cost (even if shipping was free) plus the payment-gateway fee for card, Tabby or Tamara payments (cash on delivery: delivery cost only) — this also applies to refused or unopened parcels.
  • Returns are inspected by our quality team; if a return is rejected (used / missing parts), the item is shipped back to you at your expense.
  • Damaged on arrival? Report within 48 hours with a photo. Full Return & Refund Policy

💸 Refund Timing

  • Cards: we process within 2 business days of approval; your bank posts it within 5–14 days.
  • COD: bank transfer (IBAN) within 3–5 business days after inspection.
  • Tabby / Tamara: per the provider’s refund policy (plan cancelled or adjusted).
  • All refunds include 5% UAE VAT.

🛡️ 1-Year Totot Warranty

Every product is covered for a full year against manufacturing defects — free Aramex collection and resolution within 7 business days of inspection. Deliberate damage is not covered (specialist inspection team). Full Warranty Policy

🇦🇪 Customs & Taxes

We ship within the UAE only — no customs duties apply. All prices already include 5% UAE VAT; the checkout total is exactly what you pay.

Updated: October 2026 • Questions? WhatsApp +971 50 242 8213 (9 AM–11 PM GST daily) • support@totot.ae

Q & A

Q & A

Ask a question
You must be logged in to ask a question Log In
There are no questions yet