The Soundcore Rave Party 2 (model A3399) is Anker’s 40 cm tall party speaker, built for gardens, beach evenings and large majlis gatherings. It weighs 5.3 kg, has a carry handle and a built-in light show, and Anker rates its audio output at 120W. A 4-inch woofer and two 2-inch tweeters cover 50 Hz to 20 kHz, a rear MIC port takes a wired microphone for karaoke, and PartyCast links up to 100 identical speakers. The 4,900mAh battery runs for up to 16 hours depending on volume and content, and a USB-A port can top up your phone.
Table of Contents
Sound: 120W, one woofer, two tweeters
Anker’s user guide lists the audio output power as 120W, but it does not say whether that is a continuous RMS figure or a peak figure, so treat it as Anker’s headline rating rather than a number to compare directly with RMS-rated speakers. The driver layout is published: one 4-inch woofer and two 2-inch tweeters, with a frequency range of 50 Hz to 20 kHz. The BassUp button lifts the low end, and the Soundcore app offers six EQ presets: soundcore Signature, Voice, Treble Boost, Balance, BassUp and Custom. Outdoors or in a large room the Soundcore Rave Party 2 carries across a crowd; for quiet bedroom listening it is more than you need.
PartyCast and stereo pairing
Two identical speakers can pair in True Wireless Stereo for separate left and right channels: connect one to your phone, then hold the Bluetooth button for two to three seconds on both until they flash white. For bigger events, PartyCast links up to 100 Rave Party 2 units so they play the same music; connect the master to your phone and press the PartyCast button once on each speaker. soundcore also publishes pairing guides with other PartyCast models such as Flare 2, Select Pro, Rave PartyCast, Rave Neo, Rave Neo SE and Motion Boom Plus. Bluetooth is version 5.3, and Anker quotes a 100 m range, an open-space figure that walls and crowds will shorten.
Microphone, AUX and USB
The MIC port on the back of the Soundcore Rave Party 2 takes a wired microphone for karaoke or a short speech, with dedicated knobs for mic volume, mic gain and reverb. A microphone is not mentioned among the contents, so plan to use your own. There is also a 3.5 mm AUX input for a laptop or older player, and the USB port plays .mp3 files from a storage drive. The same USB-A port charges a phone at up to 5V⎓2.1A from the speaker’s own battery, which is handy on a long beach day, though every percent you give the phone comes off the music time.
Battery and charging
The battery is rated 4,900mAh at 7.2V, and Anker lists playtime of up to 16 hours, noting it varies with volume level and music content; with the lights on, BassUp engaged and the volume high, expect noticeably less. Charging is through a 12V⎓2A DC input with the original charger and takes about 5.5 hours, so the Soundcore Rave Party 2 does not charge from a USB-C phone charger. If it has not been used for a long time, soundcore recommends charging for at least an hour before switching it on. Auto power-off can be set to 5, 10, 20 or 60 minutes, with 20 as the default.
Lights, controls and the app
The light show has its own light-mode button on the top panel, alongside power, Bluetooth, PartyCast, play/pause, volume and BassUp, so guests can change the volume without touching your phone. The Soundcore app adds the EQ presets, prompt-tone settings, auto power-off and firmware updates; soundcore advises not to use your phone during an update unless the app may run in the background, and the speaker restarts on its own afterwards. To reset the Soundcore Rave Party 2, switch it on and hold the Bluetooth and Volume+ buttons for 5 to 8 seconds.
Who This Is Not For
The Soundcore Rave Party 2 is not a pool speaker: it is rated IPX4, which handles light splashes only, with no dust rating, so keep it out of the rain and away from water. At 5.3 kg and 40 cm tall it does not suit backpacks or hikes. It charges only through its 12V DC input with the original charger, not over USB-C, and Anker does not say whether the 120W figure is RMS or peak.
Ordering from Totot
Totot sells the Soundcore Rave Party 2 brand-new and genuine in its sealed box, backed by a 1-year warranty from Totot. Delivered across the UAE in up to 3 business days, free on orders from AED 300, with cash on delivery or instalments via Tabby and Tamara. Items that arrive defective or not as ordered can be returned within 14 days, and any shipping damage should be reported within 48 hours of delivery. Browse more in our Portable Speaker range, or see the official soundcore Rave Party 2 support page.
Soundcore Rave Party 2 Specifications
- Model: Anker Soundcore Rave Party 2 (A3399)
- Audio output: 120W (Anker does not state RMS or peak)
- Drivers: 1 × 4-inch woofer, 2 × 2-inch tweeters
- Frequency range: 50 Hz – 20 kHz
- Battery: 4,900mAh / 7.2V
- Playtime: Up to 16 hours (varies with volume and content)
- Charging: DC 12V⎓2A input, about 5.5 hours with the original charger
- USB output: 5V⎓2.1A
- Bluetooth: 5.3, range up to 100 m (open space)
- Pairing: TWS stereo pair; PartyCast up to 100 Rave Party 2 units
- Inputs: MIC port (volume, gain, reverb), 3.5 mm AUX, USB (.mp3 playback)
- EQ: 6 presets in the Soundcore app, BassUp button
- Water resistance: IPX4
- Dimensions: 19.1 × 19.8 × 40 cm
- Weight: 5.3 kg
- Warranty: 1-year warranty from Totot
Soundcore Rave Party 2 FAQ
Is the 120W figure RMS?
No figure is given: Anker’s guide lists 120W audio output without saying whether it is RMS or peak.
How long does the Soundcore Rave Party 2 battery last?
Up to 16 hours, depending on volume and music content, per Anker.
Can I connect a microphone?
Yes. The rear MIC port takes a wired microphone, with mic volume, gain and reverb controls.
How many speakers can I link with PartyCast?
100 Rave Party 2 units, according to Anker.
Can the Soundcore Rave Party 2 charge from a USB-C charger?
No. It charges through a 12V DC input with its original charger, taking about 5.5 hours.
Is it waterproof?
No. It is IPX4, which covers light splashes only.
Is it genuine?
Yes. We sell the genuine Anker Soundcore Rave Party 2, brand-new in its sealed box.
How long does delivery take?
Up to 3 business days anywhere in the UAE, free on orders from AED 300; any current delivery fee for your order is shown at checkout.
No products in the cart.
MOKA HK (verified owner) –